Electronic Solutions of Harrison, LLC Original Reversing Auto-Feed Plus® Operating Guide 989-386-9801

Engine	Max RPM	Alternator Calibration	Magnetic Pickup	Off RPM	On RPM
CAT 3176 360 HP	2100		118	1900	1500
CAT 3406 500 HP	2100		113	1900	1500
CAT 3412 E 650 HP	2100		136	1900	1650
CAT 3306	2100		156	1900	1650
CAT C-10,& C12	2100		113	1900	1650
CAT C-15, C 16	2100		136	1900	1650
CAT 3126B	2200		156	2100	1750
Cat/Perkins 26.1 HP	3240		96	2900	2650
Cat/Perkins 23.5 HP	3400	9	96	3300	2650
Cat/Perkins 33.7 HP	3240		109	2700	2400
Cat/Perkins 33 HP	2800	9.3	109	2700	2400
Cat/Perkins 50 HP	3025	9.4	126	2700	2400
Cat/Perkins 50 HP	2800	9.4	126	2700	2400
Cat/Perkins 60 HP	3025		126	2700	2400
Cat/Perkins 86 HP	2550	16.5	126	2300	2050
Cat/Perkins 88 HP	2500	16.5	126	2400	2150
Cat/Perkins 115 HP	2425		126	2300	2050
Cat/Perkins 115 HP	2500	16.5	126	2400	2050
Cat/Perkins 140 HP	2225		126	2100	1800
Cat/Perkins 125 HP	2400	16.5/17.1	126	2300	2050
Cat/Perkins 180 HP	2525		126	2400	2150
Cat/Perkins 188 HP	2500	14.5	126	2400	2150
Cat/Perkins 250 HP	2100		154	2000	1600
Cummins 3.3 65 HP	2500		110	2400	2150
Cummins 3.3 85 HP	2500		127	2400	2150
Cummins 4B & 6B 80/200 HP	2500	17	159	2400	2150
Cummins 6CTA 250 HP	2100	20	158	2125	1800
Cummins B 80, P100, B 116	2500	17	159	2400	2150
Cummins P 125	2500	17	159	2350	2100
Cummins B130, PP173, QSB205, B200	2500		159	2400
Cummins QSM11400, QSX15 525, QSK23 760	2100		118	1900	1650
Cummins QST23 960	2100			1900	1650
Cummins QST30 1000	2100			1900	1650
All Duetz Engines	2800	12.5		2700	2400
Ford 4 Cyl. 70 HP	2800	14.5		2700	2400
Ford 6 Cyl. 119 HP	2800	15.3		2700	2400
G.M. 3.0 L / 4.3 L	2800	19		2700	2400
Hatz 35 HP	2800	12		2700	2400
Honda 20/24 HP	3600	3		3300	2650
John Deere 80/170 HP	2500	16	129	2400	2150
John Deere 180/250 HP	2200	16	129	2150	1770
John Deere 80/170 HP	2500		129	2400	2150
Kohler 25/27 HP	3400	9	1	3300	2650
Kubota 49 HP	2800	9 or 12		2700	2400
Lombardini 25 HP	2800	5		2700	2250
Lombardini 57 HP	2800	13		2700	2400
Wisconsin 30/35 HP	2800	Ignition Coil “-” CAL 2	24	2700	2400
Wisconsin 37 HP	2400	Ignition Coil “-” CAL 2	27	2300	2050
Wisconsin 65 HP	3000	Ignition Coil “-” CAL 2		2900	2650

· To prevent mistakes, the user must go through all SEVEN steps or program will not set. See back for troubleshooting guide.

· If, after starting to set the unit, no entries are made after 7 seconds, the unit will go back to the last program setting.

· So, if you make a mistake, not to worry, it will just go back to the last set program. If you need help, just call!

Text Box: Warranty: Electronic Solutions of Harrison, LLC and/or it’s subsidiaries and it’s affiliates (“the Manufacturer”) warrants its products, hereafter referred to as “the Product” or “Products,” to be in conformance with its own plans and specifications and to be free of defects in materials and workmanship under normal use and service for a period of twelve months from the date of shipment by manufacturer. The Manufacturer’s obligations shall be limited within the warranty period, at its option, to repair or replace the product or any part thereof. The Manufacturer shall not be responsible for dismantling or reinstallation charges. To exercise the warranty the product must be returned to the manufacturer freight prepaid and insured. This warranty does not apply in the following cases: Improper installation, misuse, failure to follow installation and operating instructions, alteration, abuse, accident, tampering, power washing, or welding and/or repair by anyone other than the manufacturer. This warranty is exclusive and expressly in lieu of all other warranties, obligations or liabilities, whether written, oral express or implied, including any warranty of merchantability or fitness for a particular purpose or other wise. In no case shall the Manufacturer be liable to any one for any consequential or incidental damages for breach of this warranty or any other warranties whatsoever, as aforesaid. This warranty shall not be modified, varied or extended, and the Manufacturer does not authorize any person to act on its behalf in the modification, variation or extension of the warranty. This warranty shall apply to the Product only. All products, accessories or attachments of others used in conjunction with the Product, including batteries, shall be covered by their own warranty, if any. The Manufacturer shall not be liable for any damage or loss whatsoever, whether directly, incidentally, consequentially or otherwise, caused by the malfunction of the Product due to accessories, products, and attachments of others, including batteries, used in conjunction with the Product. The Manufacturer shall have no liability for any personal and/or bodily injury and/or property damage, or death or other loss whether direct, indirect, incidentally, consequentially or otherwise, based on a claim that the Product failed to function. However, if the Manufacturer is held liable, whether directly or indirectly, for any loss or damage arising under this limited warranty or otherwise, regardless of cause or origin, the Manufacturer’s maximum liability shall not in any case exceed the purchase price of this Product, which shall be fixed as liquidated damages and not as a

· 6.5 to 36 VDC Operation ● 10 Rated Outputs

· All Temperature Rated ●Any Sensor Type Input

· SAE 3.25” Diameter—Fits most engine panels

· Completely Sealed from Moisture (submersible)

· NOT POWER WASH PROOF (read above)

Specifications:

· Gas or Diesel Engine ● Bright RED LED Display

· Easy to Program

· Hardware, wiring harness mounting hardware, gasket and instruction sheet included.

· This is a sensor that reads outputs, this does not control the engine or machine in any way.
CALL 1-866-736 6839 today to order!

Text Box: Step One—Calibration Press and hold BOTH push buttons until you see “HOUR,” the amount of hours, then a blank
display (about 4 seconds). Now release the buttons. You will see “CAL”
displayed then a CAL number. Enter the Calibration Number (1-200) After step one, press the RIGHT button to
increase the number, press the LEFT button to decrease the number shown in the read-out. For the Kohler engine, “CAL” is 9.1.

Text Box: Turning your Auto-Feed On or Off If you need to turn your auto feed off, simply press and hold the left button for 4 seconds, then release. To turn it back on, press and hold the right button for 4 seconds.

Text Box: Step Two—Setting the HI Limit Press and release both buttons again. You will now see HI displayed. Enter the Hi or Feed On RPM number by: Pressing the RIGHT button to increase the number in the read-out, OR Press the LEFT button to decrease the

Text Box: Step Three—Setting the Lo Limit Press and release both buttons again. You will now see Lo displayed. Enter the Lo or Feed Off RPM number by: Pressing the RIGHT button to increase the number in the read-out, OR Press the LEFT button to decrease the
number.

Text Box: Step Six—Setting TYPE
(Reversing or Non-Reversing) Press and release both buttons again. You will now see “TYPE” displayed. Enter TYPE 0 or 1 Use TYPE 0 for standard Auto-feed. Use TYPE 1 for new style reverse. Step Six—Exit Program Mode Press both buttons again, now display
will read SET! Unit is now programmed.

Revised June 20, 2007